Description
***Allow one week to make up set.***
Goliath UNC Tap Set -HSS
- 21pieces boxed set including taper, intermediate & bottom of each size.
Contents
Title | Qty |
---|---|
No 6G x 32 UNC Taper HSS Tap - Goliath | 1 |
No 6G x 32 UNC Intermediate HSS Tap - Goliath | 1 |
No 6G x 32 UNC Bottoming HSS Tap - Goliath | 1 |
No 10G x 24 UNC Taper HSS Tap - Goliath | 1 |
No 10G x 24 UNC Intermediate HSS Tap - Goliath | 1 |
No 10G x 24 UNC Bottoming HSS Tap - Goliath | 1 |
1/4" x 20 UNC Taper HSS Tap - Goliath | 1 |
1/4" x 20 UNC Intermediate HSS Tap - Goliath | 1 |
1/4" x 20 UNC Bottoming HSS Tap - Goliath | 1 |
5/16" x 18 UNC Taper HSS Tap - Goliath | 1 |
5/16" x 18 UNC Intermediate HSS Tap - Goliath | 1 |
5/16" x 18 UNC Bottoming HSS Tap - Goliath | 1 |
3/8" x 16 UNC Taper HSS Tap - Goliath | 1 |
3/8" x 16 UNC Intermediate HSS Tap - Goliath | 1 |
3/8" x 16 UNC Bottoming HSS Tap - Goliath | 1 |
7/16" x 14 UNC Taper HSS Tap - Goliath | 1 |
7/16" x 14 UNC Intermediate HSS Tap - Goliath | 1 |
7/16" x 14 UNC Bottoming HSS Tap - Goliath | 1 |
1/2" x 13 UNC Taper HSS Tap - Goliath | 1 |
1/2" x 13 UNC Intermediate HSS Tap - Goliath | 1 |
1/2" x 13 UNC Bottoming HSS Tap - Goliath | 1 |
About HSS Straight Flute Short Machine and Hand Taps
- These general-purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance, and resistance to micro-chipping, ensuring a long tool life.
About UNC Unified National Coarse
- This thread form was introduced in 1948 as an attempt to standardize thread forms in the USA, Canada, and the UK.
- The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard.
- The thread is described by its major diameter and the number of threads per inch of length (TPI).
- This thread series is commonly used in the mass production of bolts, screws, and nuts.
- It is used for threading into lower tensile strength materials (bronze, brass, aluminium, and plastics) to obtain the best resistance to stripping the internal thread.
- It is also used on quick assembly or disassembly or if corrosion or slight damage is possible.
About Intermediate Taps
- Intermediate Taps have a lead of four threads and are used in most general-purpose applications to cut a thread true to a pre-drilled pilot hole.
- Manufactured from HSS this general-purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
About Taper Taps
- Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high-precision holes.
- Manufactured from HSS this general-purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
About Bottoming Taps
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
- Manufactured from HSS this general-purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
Specifications
- AIMS SKU A0159828
- Brand Goliath
- Model Number ETDS02
- Barcode Number 9349009021243
- Type Tap Set
- Tap Lead/s T,I,B
- Number of Taps 21
- Tap Material HSS
- Thread Type UNC
SKU: A0159828
Goliath ETDS02 No 6 - 32 - 1/2" UNC Tap Set - HSS,
Goliath UNC Tap Set - HSS
$554.24
SAVE $271.56 (33%)
Notify me when back in stock
Reviews
Write a product review!
Help other AIMS Industrial Supplies users shop smarter by writing reviews for products you have purchased.