CRC Zinc Rust Protection

• CRC Zinc’s unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours.
• High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal.
• CRC Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier.
• For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC Zinc.
• To achieve a high film build, use CRC Prep It as an intermediate coat if required.
• Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions.
• Protection in extreme conditions may require re-application more frequently.

Applications:

• Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed.
• Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface.
• When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.

Features/Benefits:

• Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating
• Satin finish – Available in seven colours.
• Safety – Colours conform to British Safety Colour standards.
• Excellent adhesive qualities – Forms a tough coat for long-term protection.
• Heat Resistance – Up to 120°C.
• Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions).
• Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours.
• Easy re-application over existing film and/or clean surfaces – For ongoing protection.
• Single coat – No over coating required.