Inside / Outside Magnet 90°

• Hold stock from the outside, leaving clearance for inside welds or hold stock from the inside for outside welds.
• Hold and position sheet metal, round pipes, square, angled or flat stock.
• The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to work pieces.
• Use mounting holes to link two magnets together for use as fixtures.
• Use hex hole on magnet for breakaway leverage
• 90 degree with 30 & 60 degree.

Include

• MLD300 - Angles 30 and 60 Degrees, Height 75.5mm, Width 52mm, Thickness 14mm and Magnet Pull Force 9kg.
• MLD500 - Angles 30 and 60 Degrees, Height 125mm, Width 85mm, Thickness 14mm and Magnet Pull Force 15kg.