MP2050 Turbo 12 Square Shoulder Milling Insert 

• MP2050 grade, carbide PVD.
• PVD (Physical Vapour Deposition).
• PVD coated grades are recommended for applications with low feed rates where high edge toughness is required.
• PVD-coated grades are suitable for applications with low to intermediate cutting speed.

MP2050 Grade

• PVD-coated grade for tough machining conditions and high temperatures in martensitic and austenitic stainless steels, dry and wet machining possible.
• Alternative in superalloys in unstable conditions.
• (Ti, Si)N/(Ti, Al)N.

About Turbo Square Shoulder Milling

• Aggressively optimize your cutting properties with Seco’s Turbo family of cutters that reduce heat generation and cutting forces.
• These cutters are available in a variety of configurations, all with copy milled pockets for insert stability and two pitch configurations to tackle almost every material.
• Maximize output in a wide range of applications including; roughing, semi-finishing, finishing.
• Methods include all facing, slotting, profiling contouring, helical interpolation, ramping, and plunging applications.