Morey's Red-i Waterproof Marine Grease

• Red-i Waterproof Marine Utility Grease is a premium, heavy duty, EP multi-purpose lithium complex grease fortified with polymers, anti-wear agents, tackiness additives and rust and corrosion inhibitors.
• This grease is designed to "stay in place" and lubricate under the most severe operating conditions found in marine service.
• It is unsurpassed in resisting water wash-out and protecting against wear in shock loading applications.

Typical Uses

• Recommended for trailer wheel bearings including disc brake applications, trailer chassis lubrication and outboards.

Features

• Adhesive-tacky grease that "stays in place and lubricates".
• Unexcelled salt and fresh water wash-out resistance due to high viscosity base oils fortified with polymers.
• Excellent protection against failures caused by shock loading.
• Extreme pressure protection. Exceeds 85 lb (39 kg) in the Timken OK Load Test.
• Critical metal surfaces of moving parts are protected from rust and corrosion even under the most adverse conditions.
• Distinctive blue/green colour quickly identifies the grease and helps detect defective bearings.
• Reduced maintenance expense because "stay in place" and "lubricates" attribute means less frequent greasing intervals and extended equipment life.
• Oxidation inhibitors permit high temperature operations for extended periods.
• Environmentally conscious.
• Operating temperature range: -20°C to 230°C.
• Universal marine applications.

Note:

• Not Recommended for small anti-friction bearings operating over 5000RPM Tackiness additives used to make this grease "stay in place" make it harder to pump and may require the use of a heavy follower plate in air operated grease pumps.
• Not recommended for centralised dispensing systems commonly found in industrial plants unless they are capable of pumping grease of this type