Deep Groove Ball Bearing Rubber Seal - 6200 Series
- Deep Groove Ball Bearing Rubber Seal.
- 6200 Series.
About Deep Groove Ball Bearing
- Deep groove ball bearings are available in a variety of sizes and are the most popular of all rolling bearings.
- This type of bearing supports radial load and a certain degree of axial load in both directions simultaneously.
- Simplifies the sealing structure of applications.
- Greasing is not necessary because bearings are pre-lubricated.
With locating snap ring
- Bearings with a locating snap ring can be fitted to the housing easily, as the locating snap ring facilitates axial positioning.
Extra-small ball bearings and miniature ball bearings
- The open type is widely used. Also available are the shielded/sealed type and the flanged type; the latter is easily positioned in the axial direction.
Features Deep Groove Radial Bearing
- Type: Open Type, Shielded/ sealed type, With locating snap ring, Maximum type, and Double-row.
- The most popular rolling bearing type used in a wide variety of industries and applications.
- The inner and outer rings have deep uninterrupted grooves.
- They can support radial loading and a certain degree of axial loading in either direction
- High-speed capability.
- The Maximum style not to be used when axial loading or high speed is involved.
- Sealed and shielded types are filled with an appropriate volume of grease.
- Bearings with a locating snap ring aid axial positioning and eliminate the need for housing shoulder.
- Cages can be a pressed steel, machined copper alloy, molded polyamide, synthetic resin, pressed stainless sheet steel
- Automotive: Transmissions, electrical devices, truck, and trailer equipment.
- Off-Highway Vehicles: Construction equipment, agricultural equipment, railroad rolling equipment.
- Electrical Equipment: Standard motors, electric appliances for domestic use
- Other: Measuring instruments, medical instruments, and miscellaneous industrial equipment.
- AIMS SKU A0153039
- Brand Koyo
- Model Number 6205-2RS/KOYO
- Bore Diameter x Outer Diameter x Width (mm) 25 x 52 x 15
- Mounting Dimension (mm) Da Max 47
- Boundary Dimension (mm) r min. 1
- Basic Load Rating (kN) C0r 7.85
- Outside Diameter D (mm) 52
- Mounting Dimension (mm) Da Min 30
- Factor F 0 13.9
- Basic Load Rating (kN) Cr 17.5
- Bore Diameter d (mm) 25
- Mounting Dimension (mm) Ra Max 1
- Limiting Speed (min-1) Grease lub. (RS, 2RS) (Z) 8400
- Fatigue Load Limit (kN) Cu 0.55
- Bearing Width B (mm) 15
- Type Deep-Groove Ball Bearings
- Series 6200 Series