Bordo E-Z Chamfer Hex Shank Deburring & Chamfering Tool

• Chamfer and de-burr bolts, pipe, threaded rod, bar, and dowels.
• Manufactured from M2-HSS for extreme tool life.

About E-Z Chamfer

• Create a perfect chamfer for:
  • starting a nut on a bolt or threaded bar.
  • starting a button die or die nut on the rod.
  • creating a leading-edge timber dowel.

• E-Z Chamfer efficiently removes burrs and ridges from bolts, pipes, threaded rods, bars, and dowels.
• It is suitable for use on metals including mild and hardened steels, stainless steel, copper and brass, as well as timber, fibreglass, and plastics.
• E-Z Chamfer prevents sparks and burns. When used correctly at low RPMs the tool will not overheat the workpiece. Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die.

Unique Patented Design

• World-first M2-HSS Chamfer Tool.

About Heavy-Duty Single-Piece Construction

• Suitable for use on ferrous and non-ferrous metals including:
  • Mild Steel - U.S. Grade 2 - Metric Grade 4.8
  • Hard Steel - U.S. Grade 5 - Metric Grade 8.8
  • Very Hard Steel - U.S. Grade 8 - Metric Grade 10.9
  • Stainless Steel - 300 Series
  • Super Hard Steel - U.S. Grade ASTM-A574 - Metric Grade 12.9

About Usage

• Use at Low Speed - Maximum 800RPM.
• Use in Impact Drivers will reduce the tool life.
• Start E-Z Chamfer square to the workpiece. A circular motion may improve performance on large diameter workpieces.
• E-Z Chamfer works by shearing a small amount of material every revolution. Slow drill speed with medium pressure will yield the best results in most materials.
• Hard materials will require a high feed pressure. In most applications, it is only necessary to chamfer the first 1 to 3 threads.
• Read and follow the safety instructions supplied in your owner's manual before operating any power tool.
• Wear eye and hearing protection.