***Special Order. Lead time is 150 days from the date of order. Please contact AIMS for further assistance.***

MANOSKOP 714 - Indicating and Cut-out Electromechanical Torque and Angle-controlled Wrench

• 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque)
• High-definition colour display with additional side-mounted indicator lamps
• Freely configurable menu structure
• Optional: Li-ion battery No 7195-2 and charger No 7160
• 3 function modes: cut-out peak (indicating mode with peak value) track (indicating mode with current value)
• Micro USB 2.0 interface
• Bayonet connection for battery compartment
• QuickRelease safety lock change system for insert tools
• Angle-controlled measurement without a reference arm
• Data storage (< 2500 tightening jobs) as many as 200 joints can be programmed in up to 25 preset sequences.
• Different tolerance limits can be set for each joint
• Acoustic and visual assessment of the joint
• Rapid, accurate setting via keypad
• The automatic keypad lock prevents inadvertent changes
• Overload protection by means of acoustic and visual signals and a fail-safe system (clockwise
• Automatic notification of the next calibration date, either by the number of joints or the time interval
• Fully automated calibrating and adjusting using the perfect control calibrating and adjusting unit No 7794-2 (torque) or 7794-3 (torque and angle)
• Units of measure: N m, ft.lb, in.lb.
• Tightening torque is automatically corrected if a deviating extension is entered
• Immediately reusable after release
• Clockwise and anticlockwise tightening it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode
• Tactile, visual and acoustic trigger signal.
• Torque and angle are simultaneously visible
• All readings are independent of the point of application of force (with sizes 1, 2 and 4)
• Safe handling due to ergonomically designed handle (resistant to oils, grease, fuels, brake fluid and Skydrol)
• 2 certificates (torque, angle)
• In sturdy plastic case (size 40 in steel case)
• Design patent, other patents applied for
• Supplied with Sensomaster software, USB cable, 4 AAA/LR03 micro-batteries, 1.5 V. AAA, 1.2 V, micro NiMH rechargeable batteries can be used
• Display resolution, angle 0.1°
• Display deviation value, angle ±1% ±1 digit
• Display resolution, torque (< 40 N m: 0.01 Nm; > 40 N m: 0.1 Nm
• Display deviation value, angle ±2% ±1 digit