Pferd Felt Fan Grinder

• Mounted Felt Flap Wheels Shank FLS HARD
• Mounted felt flap wheels are used with polishing pastes for pre-polishing and high-gloss polishing of small to medium-sized components.
• With its flap design, this polishing tool adapts ideally to the workpiece contours. The thermal load of the workpiece is significantly reduced.

Product benefits

• Low thermal load on the workpiece.

Materials that can be worked:

• Aluminium
• Cobalt-based alloys
• Other non-ferrous metals
• High-temperature-resistant materials
• Nickel-based alloys (e. g. Inconell and Hasteloy)
• Bronze
• Hard non-ferrous metal
• Titanium
• Titanium alloys
• Copper
• Soft non-ferrous metal
• Brass
• Stainless steel (INOX)
• Thermoplastics
• Fibre-reinforced duroplastics (GRP, CRP)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Steels up to 1,200 N/mmÅ’_ (< 38 HRC)
• Cast steel

Applications

• Polishing

Drive types

• Flexible shaft drive
• Straight grinder

Recommendations for use

• The hard type is ideal for pre-polishing flat surfaces
• The soft type is optimal for high-gloss polishing and processing work pieces with lots of contours
• If very fine finishes need to be achieved, the two types can be used successively. This requires the use of suitable polishing pastes.