Description
Description
*** JTEKT (Formerly Koyo Brand) ***
Thrust Needle Roller - Cage & Roller Assembly (NTA)
- Thrust needle roller and cage assembly with inch nominal dimensions using needle rollers of the smallest practical diameter.
About Thrust Needle Roller And Cage Assemblies, Thrust Washer
- Dimensions for bore and O.D. of thrust assemblies and washers are nominal.
- Thrust washers burnished at least one - quarter of bore area (remainder is rough breakaway finish).
- O.D. finish of washers will be as blanked.
About Mounting Tolerances Thrust Needle Roller And Cage Assembly
- On NTA inch type thrust needle roller and cage assemblies, the cage bore has a larger contact area and a closer tolerance than outer diameter.
- Therefore, bore piloting is preferred for these assemblies.
- To reduce wear, it is suggested that the piloting surface for the cage be hardened to an equivalent of at least 55 HRC.
- Where design requirements prevent bore piloting, the NTA thrust needle roller and cage assemblies may be piloted on the outer diameters.
- It should be noted that the "diameter to clear washer O.D." given in the bearing tables is not suitable for outer diameter piloting.
- For such cases, suitable O.D. piloting dimensions should be determined in consultation with your representative the engineering section of this catalog.
Specifications
Specifications
Applications
Applications
Features & Benefits
Features & Benefits
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Thrust Needle Roller - Cage & Roller Assembly (NTA)
Thrust Needle Roller - Cage & Roller Assembly (NTA)
SKU: A0157537
- Wide Range
- Reliable Services
- Proven Trust
Available
The Thrust Needle Roller by Koyo is a Thrust Needle Roller Cage with inch nominal dimensions. It provides an equivalent hardness of at least 55 HRC on piloting surfaces and is suitable for Bearings & Power Transmission applications.
- FREE SHIPPING OVER $299*
- RETURN AND EXCHANGE POLICY
Resources
Couldn't load pickup availability
Description
Description
*** JTEKT (Formerly Koyo Brand) ***
Thrust Needle Roller - Cage & Roller Assembly (NTA)
- Thrust needle roller and cage assembly with inch nominal dimensions using needle rollers of the smallest practical diameter.
About Thrust Needle Roller And Cage Assemblies, Thrust Washer
- Dimensions for bore and O.D. of thrust assemblies and washers are nominal.
- Thrust washers burnished at least one - quarter of bore area (remainder is rough breakaway finish).
- O.D. finish of washers will be as blanked.
About Mounting Tolerances Thrust Needle Roller And Cage Assembly
- On NTA inch type thrust needle roller and cage assemblies, the cage bore has a larger contact area and a closer tolerance than outer diameter.
- Therefore, bore piloting is preferred for these assemblies.
- To reduce wear, it is suggested that the piloting surface for the cage be hardened to an equivalent of at least 55 HRC.
- Where design requirements prevent bore piloting, the NTA thrust needle roller and cage assemblies may be piloted on the outer diameters.
- It should be noted that the "diameter to clear washer O.D." given in the bearing tables is not suitable for outer diameter piloting.
- For such cases, suitable O.D. piloting dimensions should be determined in consultation with your representative the engineering section of this catalog.
Specifications
Specifications
Applications
Applications
Features & Benefits
Features & Benefits
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Thrust Needle Roller - Cage & Roller Assembly (NTA)
Customer Service
Mon-Fri, 08:00-05:00pm
Call Us
(02) 9773-0122
Talk to a Sales Engineer
sales@aimsindustrial.com.au
Warehouse Address
Milperra NSW 2214, Australia
Your cart
(0)
Your cart is currently empty.
Not sure where to start? Try these collections:
Order note
Estimate Shipping
Product Comparison
| Description |
| Price |
| Vendor |
| Type |
| Product variants |
|
| The Thrust Needle Roller by Koyo is a Thrust Needle Roller Cage with inch nominal dimensions. It provides an equivalent hardness of at least 55 HRC on piloting surfaces and is suitable for Bearings & Power Transmission applications. |
Regular price
From $11.77
Sale price
From $11.77
Regular price
Unit price
/per
| Koyo | Thrust Needle Roller Cage |
Width (inch)
5/64,1/8
Outside Diameter (inch)
15/16,1 1/8,1 1/4,1 7/16,1 9/16,1 15/16,2 1/16,2 3/16,2 1/2,2 3/4,3,3 1/4,3 5/8,3 3/4,4 1/8,4 5/8
|
Choose your option
Thrust Needle Roller - Cage & Roller Assembly (NTA)
Thrust Needle Roller - Cage & Roller Assembly (NTA)
SKU: A0157537
Hurry up, only 8 items left in stock.
The Thrust Needle Roller by Koyo is a Thrust Needle Roller Cage with inch nominal dimensions. It provides an equivalent hardness of at least 55 HRC on piloting surfaces and is suitable for Bearings & Power Transmission applications.
- Choosing a selection results in a full page refresh.
- Opens in a new window.