AAP Brass Gate Valve General Purpose

• The wedge gate valve provides an uninterrupted passage for the fflow of fluid. Body ends are inline and the gate is moved between body seats by a spindle, whose axis is at right angles to that of the body ends.
• It may be either inside screw, in which the actuating thread of the spindle is contained inside the valve and thus in contact with the line fluid, or outside screw, in which the actuating thread of the spindle is exterior to the bonnet.
• The valve is used extensively where a straight fflow is required with minimum pressure drop.
• It is not recommended for fflow regulation and should only be used fully opened or closed.

General Purpose Brass Gate Valve 

Materials
PART
MATERIAL
Body
Brass
Bonnet
Brass
Wedge
Brass
Stem
Brass
Hand Wheel
Ductile Iron
Threading
ISO 228

Specifications
Thread
ISO 228
MAX Working Temperature
180°C
Cold Working Pressure
1600kPa