Hobson MTC88YM080060 8 x 60mm Tygabolt Countersunk Sleeve Anchor, Zinc Yellow

This page covers the Hobson Tygabolt countersunk sleeve anchor (countersunk head, zinc yellow finish and class 8.8 designation). It lists 5 items: 8 and 10mm in 60 to 120mm lengths.

A sleeve anchor is fitted through the fixture into a pre-drilled hole and tightened, which expands the sleeve in the hole.

The supplier names these items "Class 8.8". No strength figures are published here, because the supplier description does not give any (manufacturer-stated).

Pack quantity varies by item, from 25 to 50 per pack, and is shown in the table.

Where this product is used

• Through-fixing an item into a pre-drilled hole, with the sleeve expanded by tightening
• Where an anchor tightened with a nut or head at the surface is wanted
• Choosing the size, length and pack quantity from the table to suit the job

Features

• 5 items: 8 and 10mm in 60 to 120mm lengths
• Countersunk head, zinc yellow finish and class 8.8 designation
• Class 8.8 as named by the supplier (manufacturer-stated)
• Pack quantities from 25 to 50, shown for each item

Common specifications

Key specifications

Selecting the right option

Choose the size and length together to suit the fixture and the base material. This page gives no load ratings, base material suitability or hole sizes, because the supplier description does not state them. Check the manufacturer's installation data for the item before you specify it.

Related products

Related anchors: Hobson Tygabolt Flush Head Sleeve Anchor, Class 8.8, Zinc Yellow, 8 and 16mm, Hobson Tygabolt Sleeve Anchor, Class 4.6, Mechanical Galvanised, 10 x 60mm, Box of 50 and Hobson Tygabolt Sleeve Anchor, Class 4.6, Zinc Yellow, 20 x 160mm, Box of 5.