Spot weld drills with a 38mm overall length and 60º taper on the shank to suit spot weld pneumatic disconnectors

Sutton Tools spot weld drills are designed for vehicle body repairs

For quick and precise drilling through existing auto panel spot welds, releasing damaged panels and enabling replacements to be fitted

Spot weld drills have a spur point designed to cut through the weld on one panel while leaving only a slight mark in the second panel

• Diameter (mm): 8
• O/A Length (mm): 38
• Pack Quantity: 1
• Material: High Speed Steel Cobalt-8
• Finish: Bright
• Shank Form: Flat
• X: als
• Cutting Edges: ul
• Standard: Sutton

• Optimal for PVC Plastic
• Optimal for Acrylic
• Optimal for Mineral Rock Wool Foams (EPS, PUR)
• Optimal for Polystyre
• Optimal for Leather
• Optimal for Rubber
• Optimal for Fibreglass
• Optimal for Carbon Fibre

• Centre nib enables accurate positioning and less drilling pressure without work hardening
• Shallow point design cuts through top panel while only slightly marking second panel
• 38mm short rigid drill designed for use with spot weld pneumatic disconnectors
• Flatted shanks with 60° taper for good location in the disconnector
• Made from HSS Co. The 8% cobalt formula improves abrasive & heat resistance, for increased strength at higher cutting temperatures