ReelX Fishing Reel Lubricant 1oz (30ml)

ReelX is a reel oil from Corrosion Technologies, the maker of CorrosionX. The SDS lists it as a corrosion inhibitor, moisture displacer and lubricant, and the manufacturer describes it as an extreme-pressure optimised reel lubricant built on CorrosionX technology with extreme-pressure additives.

It is listed for spinning, baitcasting, conventional/trolling and electric reels. The manufacturer states it will not harm plastic, PTFE or monofilament, and that it contains no wax, tar, silicone or other solids.

Where this product is used

• Spinning reels
• Baitcasting reels
• Conventional and trolling reels
• Electric reels
• Displacing moisture and helping prevent rust and corrosion on reels (manufacturer-stated benefits)

Features

• Corrosion inhibitor, moisture displacer and lubricant (SDS)
• Extreme-pressure additives with CorrosionX technology (manufacturer)
• Transparent, non-viscous, greenish-brown liquid, 33.2 cSt at 40 °C
• VOC 0 g/L
• Will not harm plastic, PTFE or monofilament (manufacturer)
• Manufacturer lists use on iron, steel, stainless steel, aluminium, copper, brass and bronze

Key specifications

Selecting the right option

For reels and applications where grease is the preferred lubricant, Corrosion Technologies lists a grease that is used in conjunction with ReelX reel oil: see ReelX Reel Treatment Grease 1oz (30ml). For an extreme-pressure lubricant from the same manufacturer, see SpeedX Bearing & Chain Lubricant 1oz (30ml).

Using it

The manufacturer's data gives no directions for use, application points or quantities.

Storage and handling

Store in a cool, dry, well-ventilated place in the original container. Keep the container closed when not in use. Avoid excess heat.

Limits and safety

No operating temperature range is stated by the manufacturer. The SDS lists bases, acids, amines and oxidising materials as materials to avoid. Section 2 of the SDS gives no hazard classification, but the first aid section warns of an aspiration hazard: do not swallow, may cause lung damage, and do not induce vomiting if swallowed. It also warns that it causes eye irritation. The SDS states the material is considered hazardous under the Australian Model Work Health and Safety Regulations, and it is not regulated as Dangerous Goods (ADG, IATA, IMDG). Read the safety data sheet before use.

Frequently asked questions

Will ReelX harm plastic, PTFE or monofilament?

The manufacturer states it will not harm plastic, PTFE or monofilament.

What types of reel is ReelX for?

The manufacturer lists spinning, baitcasting, conventional/trolling and electric reels.

What is the ReelX base oil and viscosity?

The SDS lists a hydrotreated neutral base oil (65 to 75 %) with mineral oil (10 to 15 %). Viscosity is 33.2 cSt at 40 °C and 7.0 cSt at 100 °C; the test method is not stated.

What is the flash point of ReelX?

143 °C (Cleveland open cup) per the SDS.

Is ReelX safe to swallow?

No. The SDS warns of an aspiration hazard and says it may cause lung damage. If swallowed, rinse the mouth, do not induce vomiting and call a physician or poison control centre.

Related products

See also: ReelX Reel Treatment Grease 1oz (30ml), SpeedX Bearing & Chain Lubricant 1oz (30ml), CorrosionX Corrosion Inhibitor, Moisture Displacer & Lubricant.