Pferd Cylindrical Spiral Band Rubber Drum Holder

• Rubber drum holder standard type = Hardness approx. 65-70 Shore A
• Matching, reusable rubber drum holders for using cylindrical abrasive spiral bands.
• Cylindrical rubber drum holders are designated Holding Fixtures of Cylindrical Abrasive Sleeves according to ISO 15637-1.
• The high degree of fitting accuracy between the components ensures that the abrasive spiral band remains securely attached to the rubber drum holder during use.

• Abrasive spiral bands can be mounted and removed by turning them slightly to the right
• Abrasive spiral bands are easier to mount when the rubber drum holder is mounted on the tool drive
• The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed
• Abrasive spiral bands achieve their best performance at a recommended cutting speed of 20-30 m/s
• Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes:

• The maximum permitted peripheral speed is 30 m/s
• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
• Do not allow abrasive spiral bands to protrude beyond the rubber body