Pferd Combidisc Polifan Grinding Wheel

• COMBIDISC Mini POLIFAN - Aluminium Oxide 
• For general-purpose coarse grinding work with good stock removal rates. Ideal for weld dressing in hard-to-reach areas. Longer tool life and higher stock removal rate when compared to grinding discs.
• Abrasive: Aluminium oxide A
• The COMBIDISC range covers a large selection of grinding tools for surface finishing. From coarse machining and surface texturing to face-down mirror polishing the range provides the optimal tool, even for complicated applications.
• For universal coarse grinding work with high stock removal rates.
• Ideal for dressing weld seams in hard-to-reach places
• Longer tool life and higher stock removal rate when compared to abrasive discs.

Advantages

• Easy to use
• Rapid tool change
• No adhesion, no slipping
• No loosening under the influence of heat
•  Vibration-free operation
•  Tool is always fixed centrally

Safety notes

• The maximum permitted peripheral speed is 50 m/s
•  For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times

Materials that can be worked

• Bronze
• Other non-ferrous metals
• Hard non-ferrous metal
• Titanium
• Titanium alloys
• Copper
• Soft non-ferrous metal
• Brass
• Stainless steel (INOX)
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Annealed cast iron
• Thermoplastics
• Fibre-reinforced duroplastics (GRP, CRP)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Steels up to 1,200 N/mmŒ_ (< 38 HRC)
• Cast steel

Applications

• Roughening
• Leveling
• Deburring
• Surface work
• Work on edges
• Sharpening
• Weld dressing
• Fine grinding in multiple steps

Drive types

• Flexible shaft drive
• Straight grinder
• Angle grinder
• Cordless angle grinder