Pferd Combiclick Disc Felt Final Polishing

• Combiclick - Final Polishing FELT DISC
• For pre-polishing and high-gloss polishing of medium- to large-sized components, PFERD provides COMBICLICK felt discs in a range of diameters.
• COMBICLICK felt discs are used with polishing pastes in face-down grinding on speed adjustable angle grinders.
• Suitable for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on medium-sized and large surfaces.

• High-gloss polishing of stainless steel (INOX) components in chemical plant construction
• Mirror polishing of large press or injection moulds

• Felt discs achieve their best performance at a recommended cutting speed of 10 m/s.
• This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.
• When changing the polishing paste, employ a new, unused felt disc

• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times

Product benefits

• High economic efficiency due to very long tool life.
• Focused working over the entire lifespan thanks to high dimensional stability.

Materials that can be worked:

• Aluminium
• Cobalt-based alloys
• Other non-ferrous metals
• High-temperature-resistant materials
• Nickel-based alloys (e. g. Inconell and Hasteloy)
• Bronze
• Hard non-ferrous metal
• Titanium
• Titanium alloys
• Copper
• Soft non-ferrous metal
• Brass
• Zinc
• Stainless steel (INOX)
• Thermoplastics
• Fibre-reinforced duroplastics (GRP, CRP)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Steels up to 1,200 N/mmŒ_ (< 38 HRC)
• Cast steel

Applications:

• Polishing

Drive types:

• Angle grinder
• Cordless angle grinder