Skip to main content

Description

Pferd Abrasive Spiral Band - Reduced Heat

  • For aggressive grinding with maximum stock removal on hard and tough materials that do not conduct heat well. Active grinding additives in the coating significantly improve stock removal, prevent clogging and result in cooler grinding.
  • Abrasive: Ceramic oxide grain CO-COOL
  • Use matching, reusable rubber drum holder
  • Abrasive spiral bands are designated "Cylindrical Abrasive Sleeves" according to ISO 2421.

Advantages

  • Because of slots, the holder expands during use, guaranteeing that the abrasive spiral band is firmly clamped in place
  • Outstanding tool life due to special manufacturing process ̐ even under the most demanding operating conditions
  • Particularly high stock removal and high aggressiveness of the abrasive


Recommendations for use

  • Abrasive spiral bands can be mounted and removed by turning them slightly to the right
  • Abrasive spiral bands are easier to mount when the rubber drum holder is mounted on the tool drive
  • The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed
  • Abrasive spiral bands achieve their best performance at a recommended cutting speed of 20-30 m/s
  • Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.


Application examples

  • Removing weld seams in steel construction
  • Fine grinding work in equipment, tank and vessel construction
  • Post-processing for assembly and repair work
  • Machining edges and contours in aircraft engine construction
     

Safety notes

  • The maximum permitted peripheral speed is 30 m/s
  • For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
  • Do not allow abrasive spiral bands to protrude beyond the rubber body
  • Refer to below product data sheet for recommended safe speeds

Specifications

  • AIMS SKU A0152139
  • Brand Pferd
  • Model Number 47501467
  • Barcode Number 4007220809075
  • Grit 60
  • Abrasive Size 10 x 20 mm
  • Type Spiral Band
SKU: A0152139

Pferd Abrasive Spiral Band - Reduced Heat 10 x 20mm 60 Grit 47501467 - Pack of 100

Pferd Abrasive Spiral Band - Reduced Heat

$271.00
RRP $298.10
SAVE $27.10 (9%)

Choose a different size/variant

Calculate Shipping

Browse other products under

Sanding Drums

Browse other products by

Pferd

Reviews

Write a product review!

Help other AIMS Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review