Pferd Abrasive Spiral Band Ceramic COOL

• Abrasive Spiral Band - Ceramic COOL (Top Size - Reduced Heat) GSB 2525 CO-COOL 36
  For aggressive grinding with maximum stock removal on hard and tough materials which do not conduct heat well.
• Active grinding additives in the coating significantly improve stock removal, prevent clogging and result in cooler grinding.
• Abrasive: Ceramic oxide grain CO-COOL
• Use matching, reusable rubber drum holder
• Abrasive spiral bands are designated "Cylindrical Abrasive Sleeves" according to ISO 2421.

Advantages:

• Because of slots, the holder expands during use, guaranteeing that the abrasive spiral band is firmly clamped in place
• Outstanding tool life due to special manufacturing process ̐ even under the most demanding operating conditions
• Particularly high stock removal and high aggressiveness of the abrasive

Recommendations for use:

• Abrasive spiral bands can be mounted and removed by turning them slightly to the right
• Abrasive spiral bands are easier to mount when the rubber drum holder is mounted on the tool drive
• The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed
• Abrasive spiral bands achieve their best performance at a recommended cutting speed of 20̐30 m/s
• Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

• Removing weld seams in steel construction
• Fine grinding work in equipment, tank and vessel construction
• Post-processing for assembly and repair work
• Machining edges and contours in aircraft engine construction

• The maximum permitted peripheral speed is 30 m/s
• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
• Do not allow abrasive spiral bands to protrude beyond the rubber body
• Refer to below product data sheet for recommended safe speeds

Specifications

• Size mm:25 x 25
• Grit:36