Hobson WR66PMM03 M3 x 9 x 0.8mm Mudguard Washer, Natural Nylon

This page lists 7 items of the Hobson mudguard washer (natural nylon): M3 to M12.

A mudguard washer has an outside diameter that is large for its hole size, which spreads the load of the fastener over a wider area.

The supplier description or the Hobson stock list names DIN 9021 (manufacturer-stated).

The supplier item description lists each size as the bolt or screw size followed by further figures without saying which is which. Those figures are shown as listed, and outside diameter and thickness are labelled only where the store option or the Hobson stock list states them.

Pack quantity varies by size and is shown for each item in the table.

Where this product is used

• Spreading the load of a fastener over a wide area on thin or soft material
• Bridging an oversize hole

Features

• 7 items: M3 to M12
• Natural nylon
• Dimensions shown as listed by the supplier
• Pack quantity shown for each item
• DIN 9021 named for these items (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the washer by the bolt or screw size it is made for, then check the dimensions in the table. For a similar washer in another material, finish or size range see Hobson Mudguard Washer, Nylon, Black UV Stable, M5 to M20 and Hobson Mudguard Washer, Mild Steel, Zinc Plated, 1/8" to 5/8".

Related products

Related washers: Hobson Mudguard Washer, Nylon, Black UV Stable, M5 to M20, Hobson Mudguard Washer, Mild Steel, Zinc Plated, 1/8" to 5/8" and Hobson Bevelled Washer, Brass, Chrome Plated, 6.3mm and 8.3mm.