***Allow one week to make up set.***
Goliath BSW Tap and Drill Intermediate Set - HSS
- HSS BSW intermediate tap and drill set 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2"
Contents
| Title |
Qty |
| 1/8" x 40 BSW Intermediate HSS Tap - Goliath |
1 |
| 5/32" x 32 BSW Intermediate HSS Tap - Goliath |
1 |
| 3/16" x 24 BSW Intermediate HSS Tap - Goliath |
1 |
| 1/4" x 20 BSW Intermediate HSS Tap - Goliath |
1 |
| 5/16" x 18 BSW Intermediate HSS Tap - Goliath |
1 |
| 3/8" x 16 BSW Intermediate HSS Tap - Goliath |
1 |
| 1/2" x 12 BSW Intermediate HSS Tap - Goliath |
1 |
| 2.6mm Bright HSS Jobber |
1 |
| 3.2mm Bright HSS Jobber |
1 |
| 3.7mm Bright HSS Jobber |
1 |
| 5.1mm Bright HSS Jobber |
1 |
| 6.5mm Bright HSS Jobber |
1 |
| 7.9mm Bright HSS Jobber |
1 |
| 10.5mm Bright HSS Jobber |
1 |
About HSS Straight Flute Short Machine and Hand Taps
- These general-purpose taps are ideal for creating new threads in a wide variety of materials.
- Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance, and resistance to micro-chipping, ensuring a long tool life.
About BSW British Standard Whitworth
- The angle of the thread is 55 degrees as opposed to 60 degrees in Metric and Unified threads.
- This thread form was developed by Sir Joseph Whitworth in 1841.
- The thread form has rounded roots and crests and is specified in BS84:1956.
About Intermediate Taps
- Intermediate Taps have a lead of four threads and are used in most general-purpose applications to cut a thread true to a pre-drilled pilot hole.
- Manufactured from HSS this general-purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
About Drill Bit Surface Treatment
- Bright Finish Jobber Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
