Excision Band Saw Blade M42 Profile 41 x 1.3 x 4/6 TPI - 62541406

Excision Band Saw Blade Bi-Alfa Cobalt M42 Profile

• The Excision Bi-Alfa Cobalt band saw blade has HSS-M42 cutting tips.
• The high wear resistance of the band saw blade results from very hard and evenly distributed carbides in the tooth tips, formed during the hardening and tampering process.
• The martensitic structure of the tooth tips and the high cobalt content create excellent heat resistance and toughness reducing wear rates at high sawing speeds.
• With a high chromium backing, the saw blade can withstand considerable flexing stresses, tension, and blade guide pressure.
• Bi-metal Bandsaw Blade with 8% Cobalt content.
• Regular tooth shape suits a huge range of cutting applications.
• Long lasting - high wear resistance.
• Suitable for use on metals with hardness up to 44HRc.
• Safety Protection strip on the cutting edge of the Bandsaw Blades.
• Every weld is 100% Guaranteed.
• Steel made in Germany.
• Band Welded in Australia.
• Suitable for cutting Mild steel, Structural Steel, Stainless steel, Aluminium, Alloys, Copper, and Brass.

About Bandsaw Blade

• Bandsaw Blade has 3 important dimensions Width, Length, and Tooth Pitch (Usually measured in Teeth Per Inch known as TPI.)
• Blade width is measured from the tip of the blade to the back of the blade.

Application Areas

• Profiles
• Bundled Solids
• Thin-walled Tubes
• Square Solids
• Thick-walled Tubes
• Round Solids
• Square Tubes

About The Profile Tooth

• The profile tooth withstands vibrations during the cutting of beams and tubes due to the reinforced tooth shape.
• This effect is intensified by thereduced cutting angle of 6°.