Skip to main content

Description

Flat Flanged Idler Pulley - Single Row Bearing

  • Pressed steel pulleys are designed to make a complete, economical, self contained unit for either flat or "V" side of belt.
  • They are furnished with a single-row, radial-type, highest quality precision ground, pre-lubricated ball bearing (made of 52100 bearing steel) with contact-type seals to insure positive retention of lubricant and full protection against dirt, dust or foreign matter.
  • These bearings contain a 60% fill of high temperature grease, no re-lubrication required.
  • The ball bearing inner ring is extended on both sides to provide clearance for abutting parts and greater support on the shaft.
  • A compression ring (USA Patent No. 4518372) is compressed between the center O.D. of bearing and center I.D. of pulley bearing pocket to assure a firm reliable fit of pulleys to bearing.
  • This helps distribute loads from the pulley more evenly to the outer bearing race resulting in minimum distortion of bearing O.D.
  • Tests have proven this method of bearing installation to give longer and more reliable bearing life.
  • With little or no alterations, these belt pulleys can be adapted to new designs or to existing machine.

About Application for Idler Pulley

  • Accurately bore sized for easy, quick mounting on standard 1/2" or 5/8" bolts (1/2" bore removable sleeve in all pulleys) 3/8" sleeve is available if requested.
  • Pulleys are riveted for strength and durability- No spot welding is used.
  • Feature smoothly rolled out edges which eliminate belt chafing and scuffing.
  • "Weep Holes" on the rivet circle allow water drainage when the pulley is mounted in a horizontal position.
  • Zinc Plated.

Specifications

  • AIMS SKU A0149947
  • Brand Don Dye
  • Model Number ABFI-54
  • Face Diameter (F) (mm) 69.85
  • Face Width (A) (mm) 18.8
  • Rows Of Rivets 1
  • Outside Diameter (D) (inch) 3.35
  • Weight (lbs) 0.75
  • Pulley Width (W) (mm) 28.45
  • Ga. Mat. (G) 14
  • Face Diameter (F) (inch) 2.75
  • Bore (b) Fitted with 1/2” Removable Reduction Bush - 3/8” Bush Available
  • Outside Diameter (D) (mm) 85.1
  • No. Of Rivets 6
  • Pulley Width (W) (inch) 1.12
  • Face Width (A) (inch) 0.74
  • Type Idler Pulley
SKU: A0149947 On Sale

Don Dye Flat Flanged Idler Pulley 3.35" OD x 1.12" Wide Single Row

Flat Flanged Idler Pulley - Single Row Bearing

$46.78
$51.98
Sale Ends in

Choose a different size/variant

Calculate Shipping

Browse other products under

Idler Pulleys

Browse other products by

Don Dye

Reviews

Write a product review!

Help other AIMS Industrial Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review