CRC Prep It Anti-Corrosive High Build Easy Sanding Metal Primer
- CRC Prep It is a single pack high build easy-sanding metal primer with a grey finish.
- Formulated with anti-corrosive zinc complexes, it outlasts most high build primers by inhibiting corrosion and forms a quick-drying protective coating with excellent adhesion to bare metal.
- CRC Prep It is ideal as a general purpose primer and filler coat over bare metal or as an intermediate coat over CRC Zinc It, Prime It, Rust Converter or Etch It or to facilitate high build and prepare surface prior to finish coating.
- It can be applied directly over CRC polyester automotive fillers.
- Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed.
- Apply with smooth even strokes to clean, dry surface holding can approximately 25cm from surface until desired coverage is achieved.
- When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
- High Build, Easy Sanding – Ideal as primer coat over bare metal or intermediate coat.
- Zinc enriched for corrosion protection.
- Excellent adhesion to bare metal.
- Heat Resistance – Up to 120oC.
- Fast drying – Touch dry in 20 minutes, recoat immediately, full cure in 24 hours.
- Ready to Use Aerosol – No additional mixing or chemical additives required.
- Easy application. No clean up. Grey finish. Does not contain CFCs, methylene chloride.
- Compatible with most standard decorative paint systems for metals
- AIMS SKU A0144340
- Brand CRC
- Model Number 2114
- Barcode Number 9403097021148
- Type Primer
- Volume 400 ml