Brady 65396 No Hole Single Pole Breaker Lockout, Small, 1 lockout, Red

The Brady no hole single pole circuit breaker lockout is a clamp-on lockout for single pole circuit breakers whose switch has no hole to lock through. It has a thumbwheel design so no screwdriver is needed to fit it. This listing has two sizes, small and large, each as a single lockout or a pack of 6 (manufacturer-stated).

Brady's Australian page says it locks out most single pole circuit breakers, is enhanced to lock out most Federal Pacific breakers, and takes a lock with a shackle up to 7 mm in diameter. It gives the switch tongue it fits as 16 mm wide x 11 mm thick for a 277 V device and 41 mm wide x 14 mm thick for a 480/600 V device. Brady's US pages for the same part numbers list the small size at 120/277 V and the large size at 480/600 V, polypropylene, a service temperature of -20 to 80 °C, and a detachable cleat that extends the range of compatible breakers (manufacturer-stated).

Brady's US pages show a California Prop 65 warning (titanium dioxide) on all four parts. They name the product a 'Clamp-On Breaker Lockout, Flip Cover'. Brady states no weight or standard. Check the switch tongue size against your breakers before ordering.

The Product Code is Brady's part number, which is the same as its ordering number, and Brady's US UPC is shown in the table. Use padlocks and lockout devices within your site's isolation procedure, and check that the keying and key control suit how your site manages locks.

Where this product is used

• Electrical lockout of single pole circuit breakers with no hole in the switch tongue (manufacturer-stated).
• Switchboard and distribution board isolation.

Features

• Clamp-on thumbwheel design, no screwdriver needed (manufacturer-stated)
• Small and large sizes for different breaker switches (manufacturer-stated)
• Takes a padlock shackle up to 7 mm (Brady AU page) (manufacturer-stated)
• Detachable cleat extends the range of compatible breakers (manufacturer-stated)
• Single lockout or pack of 6

Common specifications

Key specifications

Selecting the right option

Choose small or large to match your breaker switch tongue, then single or pack of 6. For breakers with a hole in the switch tongue see the Brady original single pole breaker lockout, and for DIN miniature breakers the Brady MCB lockouts for DIN breakers. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: Brady original single pole breaker lockout, Brady MCB lockouts for DIN breakers, Brady compact safety padlock and Brady compact cable padlock.