Bossweld WP26 TIG Flex Torch Head | 95WP26F

Bossweld WP26 TIG Flex Torch Head suits 26 series TIG torches. It is a flex head without a valve. It is an air-cooled head.

The torch head sits at the front of the torch body and carries welding current and shielding gas to the tungsten. It holds the collet body, collet, back cap and cup, so a damaged head shows up as gas leaks, overheating or a loose electrode. A flex head has a bendable neck, so you can set the head angle to reach into tight joints.

Where this product is used

• TIG welding where the torch head has to be replaced or upgraded
• Replacing a damaged, leaking or overheated torch head
• Setting up a spare head for production welding

Features

• Flex torch head for 26 series TIG torches
• Flexible neck for tight joints

Key specifications

Selecting the right option

Match the head to your torch series (the WP number), and check whether you want a rigid or flex head, and whether you want a gas valve fitted. The head takes the consumables for its series, so confirm you have the matching cups, collets and collet bodies. If you are unsure which head suits your torch, contact AIMS with the torch model before ordering.

Related products

Matching parts for the same torch series: Bossweld TIG Torch Rubber Power Cable 4 m, 26 Series, Bossweld TIG Switch Handle, Plastic, Small and Large, Bossweld Collet 1.6 mm, 17/18/26 Series (Pack of 5) and Bossweld Long Back Cap, 17/18/26 Series (Pack of 2).