Bossweld 26 TIG Torch, Flex, Switch 12 Pin Aero, 4 m | 95.26F.4.1.SW12A

The Bossweld 26 Series TIG Torch, Flex Head, Switch, 12 Pin Aero Plug, 4 m is a complete 26 series air-cooled TIG torch with a 4 m cable. The 26 series is an air-cooled torch for medium duty welding, with higher amperage capability than the 9 and 17 series, and it takes standard 26 series consumables.

The flex head has a bendable neck, so you can set the head angle to reach tight joints. A switch on the handle starts and stops the arc from the torch.

Where this product is used

• TIG welding in tight joints where a flex head helps access
• Replacing a worn or damaged complete torch
• Setting up a new machine with a matching torch

Features

• 26 series air-cooled TIG torch
• Flex Head
• Switch, 12 Pin Aero Plug
• Cable length: 4 m

Key specifications

Selecting the right option

Choose the torch series to match the consumables you stock and the current you weld at, then pick the head (rigid, flex or valve), the control (switch or current control), the connection to suit your machine, and the cable length. Check the plug or Dinse size against your machine socket before ordering. If you are unsure which torch suits your machine, contact AIMS with the machine model before ordering.

Related products

Matching parts for the same torch series: Bossweld TIG Torch Head WP9, WP18, WP20 and WP26, Bossweld Collet 1.6 mm, 17/18/26 Series (Pack of 5), Bossweld Alumina Cup Size 5, 8.0 mm, 17/18/26 Series (Pack of 2) and Bossweld Long Back Cap, 17/18/26 Series (Pack of 2).