Bossweld 17 TIG Torch, Flex Valve, Switch, Dinse 50, 8 m | 95.17FV.8.1.SW.DA50

The Bossweld 17 Series TIG Torch, Flex Head with Valve, Switch, Dinse 50, 8 m is a complete 17 series air-cooled TIG torch with an 8 m cable. The 17 series is an air-cooled torch for light to medium fabrication work, and it takes standard 17 series consumables.

The flex head has a bendable neck, so you can set the head angle to reach tight joints. The gas valve on the torch lets you adjust the shielding gas flow at the torch. A switch on the handle starts and stops the arc from the torch. The Dinse connection comes in Dinse 50; match it to the socket on your machine.

Where this product is used

• TIG welding in tight joints where a flex head helps access
• Replacing a worn or damaged complete torch
• Setting up a new machine with a matching torch

Features

• 17 series air-cooled TIG torch
• Flex Head with Valve
• Switch
• Dinse 50
• Cable length: 8 m

Key specifications

Selecting the right option

Choose the torch series to match the consumables you stock and the current you weld at, then pick the head (rigid, flex or valve), the control (switch or current control), the connection to suit your machine, and the cable length. Check the plug or Dinse size against your machine socket before ordering. If you are unsure which torch suits your machine, contact AIMS with the machine model before ordering.

Related products

Matching parts for the same torch series: Bossweld WP17 TIG Flex Torch Head with Valve, Bossweld Collet 1.6 mm, 17/18/26 Series (Pack of 5), Bossweld Alumina Cup Size 5, 8.0 mm, 17/18/26 Series (Pack of 2) and Bossweld Long Back Cap, 17/18/26 Series (Pack of 2).